BORDEN CHEMICAL CO -- NO 7 CHROME POLISH & CLEANER 1012N  -- 7930-00N058714
<pre>=====================  Product Identification  =====================

Product ID:NO 7 CHROME POLISH & CLEANER 1012N
MSDS Date:12/03/1985
FSC:7930
NIIN:00N058714
=== Responsible Party ===
Company Name:BORDEN CHEMICAL CO
Address:180 E BROAD ST
City:COLUMBUS
State:OH
ZIP:43216
Country:US
Info Phone Num:614-492-4031
Emergency Phone Num:614-492-4031
CAGE:86142
=== Contractor Identification ===
Company Name:BORDEN CHEMICAL CO
Address:180 E BROAD ST
Box:City:COLUMBUS
State:OH
ZIP:43215-3705
Country:US
Phone:614-225-6124
CAGE:86142

=============  Composition/Information on Ingredients  =============

Ingred Name:SILICON DIOXIDE
CAS:112945-52-5
RTECS #:VV7310000
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3

Ingred Name:OXALIC ACID, DIAMMONIUM SALT; (OXALIC ACID, AMMONIUM SALT)
    (MFR CAS # 14258-49-2)
CAS:1113-38-8
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC; (MEDIUM
    ALIPHATIC SOLVENT NAPHTHA (PETROLEUM))
CAS:64742-88-7
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:SKIN ABSORPTION:NO HAZARDS KNOWN
    TO BORDEN. INGEST:NOT TOXIC ORALLY WHEN TESTED AS DESCRIBED IN 16
    CFR PART 1500.3(C) (1) & (2). INHAL:NOT TOX BY INHAL WHEN TESTED.
    SKIN:PRIMARY IRRITANT WHEN TE STED. EYES:MODERATELY IRRITATING WHEN
    TESTED. CHRONIC:OVEREXP MAY CAUSE CNS DEPRESSION, PNEUMOCONIOSIS &
    KIDNEY DAMAGE.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INTERNAL:IF SWALLOWED, DO NOT INDUCE VOMITING. GIVE LARGE
    QUANTITIES OF WATER. CALL A PHYSICIAN IMMEDIATELY. NEVER GIVE
    ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. INHAL: REMOVE TO FRESH
    AIR. SKIN CON TACT: FLUSH SKIN WITH WATER. IF IRRITATION PERSISTS,
    CALL A PHYSICIAN. EYE CONTACT: IMMEDIATELY FLUSH WITH PLENTY OF
    WATER FOR AT LEAST 15 MINUTES. CALL A PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:212F,100C
Extinguishing Media:IN CASE OF FIRE. USE WATER SPRAY, DRY CHEMICAL,
    FOAM OR C*2O. USE WATER TO KEEP FIRE EXPOSED CONTAINERS COOL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WILL BURN.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SOAK UP WITH ABSORBENT MATERIAL AND REMOVE TO
    A CHEMICAL DISPOSAL AREA. PREVENT ENTRY INTO NATURAL BODIES OF
    WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CNTNR CLOSED. STORE IN COOL, DRY
    PLACE. INHAL:AVOID PROLONGED OR REPEATED BREATHING OF VAPOR.
    SKIN:AVOID CONT W/SKIN. EYES: AVOID CONTACT W/EYES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATORY PROTECTION
    REQUIRED IN ABSENCE OF PROPER ENVIRONMENTAL CONTROL.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA . SAFETY SHOES. HARD HATS & SUTIBLE (SUPDAT)
Work Hygienic Practices:WASH THROUGHLY AFTER HANDLING.
Supplemental Safety and Health
OTHER PROT EQPT: CLOTHING IS STANDARD PRACTICE IN MANY INDUSTRIAL
    OPERATIONS.

==================  Physical/Chemical Properties  ==================

pH:9.0
Appearance and Odor:DARK BROWN LIQUID. ODOR DISTINCT (AMMONIA)

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:RECOVER FREE LIQUID. ABSORB RESIDUE AND DISPOSE
    OF ACCORDING TO LOCAL, STATE, AND FEDERAL REQUIREMENTS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.