GOAL CHEMICAL SEALANTS CORP -- ACCELERATOR  -- 8030-00-782-1420
<pre>=====================  Product Identification  =====================

Product ID:ACCELERATOR
MSDS Date:01/01/1985
FSC:8030
NIIN:00-782-1420
Kit Part:Y
=== Responsible Party ===
Company Name:GOAL CHEMICAL SEALANTS CORP
Emergency Phone Num:213-269-0461
CAGE:04011
=== Contractor Identification ===
Company Name:GOAL CHEMICAL SEALANTS CORP
Address:3137 E 26TH ST
Box:City:LOS ANGELES
State:CA
ZIP:90023-4206
Country:US
Phone:213-269-0461
CAGE:04011

=============  Composition/Information on Ingredients  =============

Ingred Name:LEAD PEROXIDE (LEAD DIOXIDE), (OSHA PEL FROM 29CFR
    1910.1025)
CAS:1309-60-0
RTECS #:OG0700000
Fraction by Wt: 76%
OSHA PEL:0.05 MG/M3 (PB)
ACGIH TLV:0.15 MG/M3(PB); 8990

Ingred Name:TERPHENYL
Fraction by Wt: 23%

Ingred Name:STEARIC ACID
CAS:57-11-4
RTECS #:WI2800000
Fraction by Wt: 2%

=====================  Hazards Identification  =====================

Effects of Overexposure:NOT APPLICABLE BECAUSE OF PASTE FORM

=======================  First Aid Measures  =======================

First Aid:CHELATING AGENTS SUCH AS ETHYLENEDIAMINE TETRACETATE

=====================  Fire Fighting Measures  =====================

Flash Point:400F 204C
Extinguishing Media:DRY CHEMICALS, H*2O, CC*2
Fire Fighting Procedures:MASK SHOULD BE WORN (CHEMICAL)

==================  Accidental Release Measures  ==================

Spill Release Procedures:GENERAL CLEAN-UP, SCRAPE UP EXCESS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:TEMP. BELOW 80F AND AVOID TEMP. ABOVE
    300F
Other Precautions:WASH THOROUGHLY AFTER CONTACT W/SOAP AND WATER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:CHEMICAL DUST MASK
Ventilation:LOCAL EXHAUST. LOC EXHAUST-RECOMMENDED
Protective Gloves:CAN BE WORN
Eye Protection:SHOULD BE USED
Supplemental Safety and Health
KEY1:N1.

==================  Physical/Chemical Properties  ==================

HCC:N1
Spec Gravity:1.85
Solubility in Water:INSOLUABLE
Appearance and Odor:BROWN PASTE,LEAD ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Conditions to Avoid Polymerization:HIGH TEMP. OVER 300F

====================  Disposal Considerations  ====================

Waste Disposal Methods:REGULAR WASTE DISPOSAL METHODS FOR LESS THAN 1
    POUND OF LEAD PASTE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.